Chapter 12 Maintenance
12.1 View Device Information
Basic Information and Algorithms Library Version
Go to Configuration → Device Configuration → System → Device Information to view the basic
information and algorithms library version of the device.
You can edit Device Name and Device No. The device No. is used to control the device. It is
recommended to reserve the default value.
Device Status
Go to Configuration → Device Status to view the device status.
12.2 View Thermal Camera Information
The device supports viewing the detailed information of the connected thermal camera.
Go to Configuration → Device Configuration → Thermal Imaging Management to view name,
model, and other information of the thermal camera.
12.3 Log
12.3.1 Enable System Log Service
The security audit logs refer to the security operation logs. You can search and analyze the security
log files of the device so as to find out the illegal intrusion and troubleshoot the security events.
Security audit logs can be saved on device internal storage. The log will be saved every half hour
after device booting. Due to limited storage space, you are recommended to save the logs on a log
server.
Steps
1. Go to Configuration → Device Configuration → System → Service .
2. Check Enable Syslog Service.
3. Enter IP Address and Port of the log server.
4. Click Save.
Result
The device will upload the security audit logs to the log server regularly.
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
57
