Steps
Note
The function varies with different models. The actual device prevails.
1. Go to Configuration → Device Configuration → System → Image and Video Library .
2. Check Enable.
3. Set the parameters such as the device ID, user name, password, etc.
Note
The parameters should be consistent with those on the image and video library platform.
4. Set other parameters.
Heartbeat Cycle
The connection time between the device and the image and video library platform.
Max. Times of Heartbeat Timeout
The max. times of heartbeat timeout when the device connects to the image and video
library platform.
5. View Registration Status.
6. Set Camera ID of the channel.
7. Click Save.
8.6 Set Port
The device port can be modified when the device cannot access the network due to port conflicts.
Go to Configuration → Device Configuration → System → Port for port settings.
Figure 8-5 Set Port
HTTP Port
It refers to the port through which the browser accesses the device. For example, when the
HTTP Port is modified to 81, you need to enter http://192.168.1.64:81 in the browser for login.
RTSP Port
All-Rounder Bi-Spectrum Incident Detection Traffic Camera User Manual
49
