Upload the matted pictures of the target detection area to the FTP server.
Upload Additional Information to FTP
Add related information when uploading data to the FTP server.
6. Select Path/Picture Name Encoding Mode.
GB2312
Chinese characters encoding.
UTF-8
UNICODE encoding.
7. Optional: Click FTP Test to check the FTP server.
8. Set naming rules and separators according to the actual needs.
9. Optional: Edit OSD information which can be uploaded to the FTP server with the pictures to
make it convenient to view and distinguish the data.
10. Click Save.
7.1.3 Set SDK Listening
The SDK listening can be used to receive the uploaded information and pictures of the device
arming alarm.
Before You Start
The listening service has been enabled for the SDK listening, and the network communication with
the device is normal.
Steps
1. Go to Configuration → Network → Data Connection → Alarm Upload .
Figure 7-3 Set SDK Listening
2. Set IP Address/Domain and Port if you need to upload the alarm information and pictures.
3. Optional: Enable the picture uploading listening if you need to upload image information.
4. Select Protocol Type.
Note
Supported functions vary with different models. The actual device prevails.
License Plate Upload Protocol
Radar-Assisted Smart Monitoring Camera User Manual
38
Summary of Contents for iDS-TCM403-EIR/0411
Page 1: ...Radar Assisted Smart Monitoring Camera User Manual...
Page 87: ...UD28320B...