HIKVISION iDS-TCM403-EIR/0411, User Manual, Page: 25 / 87

2.2.8 Set Image Encoding Parameters
If the captured pictures are not clear, set the resolution of the captured pictures and the picture
size.
Steps
1. Go to Configuration → Capture → Capture Parameters → Picture Encoding and Composition →
Image Encoding .
Figure 2-10 Set Image Encoding Parameters
2. Select Capture Resolution.
3. Enter the picture size.
JPEG Picture Size
The size of the compressed captured picture. The actual size is related to the scene
complexity.
Composite Picture Size
The size of the compressed composite picture. The actual size is related to the scene
complexity.
Note
Only the device supporting picture composition supports composite picture size settings. The
actual device prevails.
4. Click Save.
Radar-Assisted Smart Monitoring Camera User Manual
15