HIKVISION iDS-TCM403-EIR/0411, User Manual, Page: 20 / 87

Figure 2-6 Set Picture Composition
2. Check Enable Composition.
3. Set composition types for different picture quantities.
4. Set other composition parameters.
Close-up Zooming Ratio
The higher the value is, the larger the close-up is.
Close-up Picture No.
It is the picture where the close-up comes from.
Plate Close-up Offset
The default value is 0, which is recommended to be adopted. The device can capture close-up
pictures according to the set offset when no license plate is recognized.
5. Optional: Check Output Close-up Independently to output close-up pictures independently
when the picture composition is not enabled.
Note
Enabling composition and outputting close-up independently functions conflict with each other.
You can only enable one.
6. Click Save.
2.2.5 Set Information Overlay
Set Single Picture Overlay
If you want to overlay information on the captured single pictures, set capture overlay.
Radar-Assisted Smart Monitoring Camera User Manual
10