HIKVISION iDS-TCM403-EIR/0411, User Manual, Page: 17 / 87

2.2 Set Capture Parameters
2.2.1 Set Captured Image Parameters
Set the parameters of captured images to raise the image quality.
Steps
Note
The function varies with different models. The actual device prevails.
1. Go to Configuration → Capture → Capture Images → Image Parameters .
Figure 2-3 Set Captured Image Parameters
2. Set the captured image parameters.
Contrast Enhancement
Check Enable to capture clearer images. Select Contrast Enhancement Mode, and set
corresponding parameters.
Contrast Enhancement Mode Description
On The contrast enhancement mode is always enabled.
Time The contrast enhancement mode is enabled during the set
start time and end time. In other time, it is disabled.
Brightness The contrast enhancement mode is enabled according to the
brightness of the surroundings. In this case, you can set
Brightness Level.
Radar-Assisted Smart Monitoring Camera User Manual
7