HIKVISION iDS-9632NXI-I8/16S, User Manual, Page: 49 / 273

Network Video Recorder User Manual
48
4.2 Operations in Live View Mode
In live view mode, there are many functions provided. The functions are listed below.
•
Single Screen : showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Auto-switch: the screen is auto switched to the next one. And you must set the dwell time for
each screen on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
•
Start Recording: continuous record and motion detection record are supported.
•
Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.
•
Add IP Camera: the shortcut to the IP camera management interface.
•
Playback: playback the recorded videos for current day.
•
Aux Monitor: the NVR checks the connection of the output interfaces to define the main and
auxiliary output interfaces. The priority level for the main and aux output is HDMI1/VGA1>
HDMI2/VGA2 and HDMI > VGA.
When the HDMI1, HDMI2, VGA1 and VGA2 are all connected, the HDMI1/VGA1 is used as main
output and the HDMI2/VGA2 is used as the aux output.
When the aux output is enabled, the main output cannot perform any operation, and you can do
some basic operation on the live view mode for the Aux output.