Network Video Recorder User Manual
213
Step 7
Select the Group number for the current HDD.
The default group No. for each HDD is 1.
Step 8
Click the
OK
button to confirm the settings.
Figure 15-16
Confirm HDD Group Settings
Step 9
In the pop-up Attention box, click the
Yes
button to finish the settings.
15.4.2 Setting HDD Property
Purpose:
The HDD property can be set to redundancy, read-only or read/write (R/W). Before setting the
HDD property, please set the storage mode to Group (refer to step1-4 of Chapter Setting HDD
Groups ).
A HDD can be set to read-only to prevent important recorded files from being overwritten when
the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the redundancy
HDD and the R/W HDD simultaneously so as to ensure high security and reliability of video data.
Step 1
Go to
Menu
>
HDD
>
General
.
Step 2
Select HDD from the list and click the
icon to enter the Local HDD Settings interface, as
shown in Figure 15-17.
Figure 15-17
Set HDD Property
Summary of Contents for iDS-9632NXI-I8/16S
Page 1: ...Network Video Recorder User Manual UD06013B...
Page 221: ...Network Video Recorder User Manual 220 Figure 15 26 View HDD Status 2...
Page 227: ...Network Video Recorder User Manual 226 Step 6 Click the Apply button to save the settings...
Page 258: ...Network Video Recorder User Manual 257 19 4 Summary of Changes...