HIKVISION iDS-9632NXI-I8/16S User Manual Download Page 165

Page: 165 / 273

Network Video Recorder User Manual

164

Figure 12-2

Edit Appearance

Step 6

Click

Search

to search the matched pictures and video files of human body detection.

Step 7

Enter the human body search results interface. The pictures and video files are displayed in
chart or list.

Figure 12-3

Search Results

Step 8

(Optional) Click

to play the video file.

Step 9

(Optional) Select video files or pictures from the chart or list to export to the connected
storage device.

12.1.2 Searching False Alarm Video Files/Pictures

You can search the non-human body pictures and video files which are captured by the human
body detection.

Step 1

Go to

VCA Search

Human Body Search

Step 2

Select the camera (s) for the false alarm search.

Step 3

Specify the start time and end time for search.

Summary of Contents for iDS-9632NXI-I8/16S


















































































































































































































































































Search results

Summary of Contents for iDS-9632NXI-I8/16S

Reviews:

HIKVISION iDS-9632NXI-I8/16S, User Manual, Page: 165 / 273

Search results

Summary of Contents for iDS-9632NXI-I8/16S

Reviews: