Network Video Recorder User Manual
158
11.6 Region Entrance Detection
Purpose:
Region entrance detection function detects people, vehicle or other objects which enter a
pre-defined virtual region from the outside place, and some certain actions can be taken when the
alarm is triggered.
Step 1
Go to
Menu
>
Camera
>
VCA
.
Step 2
Select the camera to configure the VCA.
You can click the checkbox of
Save VCA Picture
to save the captured pictures of VCA
detection.
Step 3
Select the VCA detection type to
Region Entrance Detection
.
Step 4
Check the
Enable
checkbox to enable this function.
Step 5
(Optional) Check the checkbox to enable the
Human Body
of target interest to filter
non-human body pictures and video files which are not triggered by region entrance
detection.
Step 6
Click
to configure the trigger channel, arming schedule and linkage actions for the line
crossing detection alarm.
Step 7
Click the
Rule Settings
button to set the sensitivity of the region entrance detection.
Sensitivity:
Range [0-100]. The higher the value is, the more easily the detection alarm can
be triggered.
Step 8
Click
and draw a quadrilateral in the preview window by specifying four vertexes of
the detection region, and right click to complete drawing. Only one region can be
configured.
You can use the
to clear the existing virtual line and re-draw it.
Summary of Contents for iDS-9632NXI-I8/16S
Page 1: ...Network Video Recorder User Manual UD06013B...
Page 221: ...Network Video Recorder User Manual 220 Figure 15 26 View HDD Status 2...
Page 227: ...Network Video Recorder User Manual 226 Step 6 Click the Apply button to save the settings...
Page 258: ...Network Video Recorder User Manual 257 19 4 Summary of Changes...