HIKVISION iDS-9632NXI-I8/16S, User Manual, Page: 153 / 273

Network Video Recorder User Manual
152
Step 6 Click the Rule Settings button to set the face detection rules. You can click-and-drag the
slider to set the detection sensitivity.
Sensitivity: Range [1-5]. The higher level corresponds to the easier detection result.
Figure 11-3 Set Face Detection Sensitivity
Step 7 Click Apply to activate the settings.
11.3 Vehicle Detection
Purpose:
Vehicle Detection is available for the road traffic monitoring. In Vehicle Detection, the passed
vehicle can be detected and the picture of its license plate can be captured. You can send alarm
signal to notify the surveillance center and upload the captured picture to FTP server.
Step 1 Go to Menu > Camera > VCA .
Step 2 Select the camera to configure the VCA.
Step 3 You can click the checkbox of Save VCA Picture to save the captured pictures of VCA
detection.
Step 4 Select the VCA detection type to Vehicle Detection .
Step 5 Check the Enable checkbox to enable this function.