HIKVISION iDS-9632NXI-I8/16S, User Manual, Page: 52 / 273

Network Video Recorder User Manual
51

Main Monitor: Enter Main operation mode.
In the live view mode of the main output monitor, the menu operation is not available while Aux
output mode is enabled.
4.2.4 Quick Setting Toolbar in Live View Mode
On the screen of each channel, there is a quick setting toolbar which shows when you single click
the mouse in the corresponding screen.
Figure 4-2 Quick Setting Toolbar
Table 4-4 Description of Quick Setting Toolbar Icons
Icon Description Icon Description Icon Description
/
Enable/Disable
Manual Record Instant
Playback
/
Mute/Audio
on
Capture PTZ Control Digital Zoom
Image Settings
Face
Detection Live View
Strategy
Information
Fisheye
Expansion 3D
Positioning
Main/Sub-Stre
am
Close
Instant Playback only shows the record in last five minutes. If no record is found, it means
there is no record during the last five minutes.
3D Positioning is for zooming in/out the specific area of live image.
Use the left key of mouse to click on the desired position in the video image and drag a rectangle
area in the lower right direction, the camera will move the position to the center and enable the
rectangle area to zoom in. Use the left key of mouse to drag a rectangle area in the upper left
direction to move the position to the center and enable the rectangle area to zoom out.
Digital Zoom is for zooming in the live image. You can zoom in the image to different
proportions (1 to16X) by moving the sliding bar from to . You can also scroll the mouse
wheel to control the zoom in/out.