HIKVISION iDS-9632NXI-I8/16S User Manual Download Page 225

Page: 225 / 273

Network Video Recorder User Manual

224

Chapter 16 Camera Settings

16.1 Configuring OSD Settings

Purpose:

You can configure the OSD (On-screen Display) settings for the camera, including date /time,
camera name, etc.

Step 1

Go to

Menu

Camera

OSD

Step 2

Select the camera to configure OSD settings.

Step 3

Edit the Camera Name in the text field.

Step 4

Configure the Display Name, Display Date and Display Week by clicking the checkbox.

Step 5

Select the Date Format, Time Format and Display Mode.

Figure 16-1

OSD Configuration Interface

Step 6

You can use the mouse to click and drag the text frame on the preview window to adjust the
OSD position.

Step 7

Click the

Apply

button to apply the settings.

Summary of Contents for iDS-9632NXI-I8/16S


















































































































































































































































































Search results

Summary of Contents for iDS-9632NXI-I8/16S

Reviews:

HIKVISION iDS-9632NXI-I8/16S, User Manual, Page: 225 / 273

Search results

Summary of Contents for iDS-9632NXI-I8/16S

Reviews: