Network Video Recorder User Manual
179
13.2 Configuring Advanced Settings
13.2.1 Configuring HIK Cloud P2P
Purpose:
HIK Cloud P2P provides the mobile phone application and as well the service platform page to
access and manage your connected NVR, which enables you to get a convenient remote access to
the surveillance system.
Step 1
Go to
Menu
>
Configuration
>
Network
.
Step 2
Select the
Platform Access
tab to enter the HIK Cloud P2P Settings interface.
Step 3
Check the
Enable
checkbox to activate this feature.
Step 4
(Optional) If required, select the checkbox of
Custom
and input the
Server Address
. The
default server address is
dev.hik-connect.com
.
Step 5
To turn the
Enable Stream Encryption
on, you can select its checkbox.
Step 6
Enter the
Verification Code
of the device.
The verification code consists of 6 capital letters and is located at the bottom of the DVR. You can
also use the scanning tool of your phone to quickly get the code by scanning the QR code below.
Figure 13-2
HIK Cloud P2P Settings Interface
Step 7
Click the
Apply
button to save and exit the interface.
After configuration, you can access and manage the NVR by your mobile phone on which the
HIK Cloud P2P application is installed or by the official website (www.hik-connect.com).
Summary of Contents for iDS-9632NXI-I8/16S
Page 1: ...Network Video Recorder User Manual UD06013B...
Page 221: ...Network Video Recorder User Manual 220 Figure 15 26 View HDD Status 2...
Page 227: ...Network Video Recorder User Manual 226 Step 6 Click the Apply button to save the settings...
Page 258: ...Network Video Recorder User Manual 257 19 4 Summary of Changes...