Network Camera User Manual
UM Network Camera 072221NA
86
Chapter 12 EPTZ
EPTZ (Electronic PTZ) is a high-resolution function that digitally zooms and pans into portions of the image,
with no physical camera movement. If you want to use the EPTZ function, select the
Fourth Stream
in live
view. Fourth stream and EPTZ must both be enabled simultaneously.
NOTE:
The function is supported only by certain device models.
12.1
Patrol
Steps
1.
Go to
Configuration
→
EPTZ
.
2.
Check
Enable EPTZ
.
3.
Check
Fourth Stream
.
4.
Select
Patrol
in
Application
.
5.
Click
Save
.
What to do next
For detailed information about the patrol settings, see the PTZ operations on the live view page.
12.2
Auto-Tracking
Steps
1.
Go to
Configuration
→
EPTZ
.
2.
Check
Enable EPTZ
.
3.
Check
Fourth Stream
.
4.
Select
Auto-tracking
in
Application
.
5.
Click
Detection Area
to start drawing.
6.
Click on the live video to specify the four vertexes of the detection area, and right click to complete
drawing.
7.
Set rules.
Detection Target
Human and vehicle are available. If the detection target is not selected, all the detected targets will be
tracked, including humans and vehicles.
NOTE:
Only certain camera models support this function.
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......