HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 81 / 90

Network Camera User Manual
UM Network Camera 072221NA 81
Chapter 10 Smart Function
10.1 Allocate VCA Resource
VCA resource offers you options to enable certain VCA functions according to actual needs. It helps
allocate more resources to the desired functions.
Steps
1. Go to VCA
→
VCA Resource .
2. Select desired VCA functions.
3. Save the settings.
NOTE:
Certain VCA functions are mutually exclusive. When a certain function or functions
are selected and saved, others will be hidden.
Road Traffic
Vehicle Detection and Mixed-traffic Detection are available for road traffic monitoring. The device captures
passing motor vehicles and non-motor vehicles and uploads relevant information together with captured
pictures.
NOTE:
For certain device models, you need to select
Road Traffic
on
VCA Resource
page
first.
This function is supported only by certain device models.
Set Vehicle Detection
The vehicles that enter the set lane can be detected and a picture of the vehicle and its license plate can
be captured and stored. Alarms will be triggered and captures can be uploaded.
Before You Start
Go to
VCA → VCA Resources
, and select
Road Traffic
.
Steps
1. Go to
VCA → Road Traffic → Detection Configuration
, and select
Vehicle Detection
as detection type.
2. Check Enable .
3. Select the total number of lanes.
4. Click and drag the lane line to set its position, or click and drag the line end to adjust the length and
angle of the line.
5. Adjust the zoom ratio of the camera so that the size of the vehicle in the image is close to that of the
red frame. Only the position of the red frame is adjustable.
NOTE:
Only one license plate can be captured at one time for each lane.