Network Camera User Manual
UM Network Camera 072221NA
71
9.9
Upgrade
Before You Start
Obtain the correct upgrade package.
CAUTION!
DO NOT disconnect power during the process. The device reboots automatically after
upgrading.
Steps
1.
Go to
Configuration
→
System
→
Maintenance
→
Upgrade & Maintenance
.
2.
Choose one method to upgrade.
•
Firmware
: Locate the exact path of the upgrade file.
•
Firmware Directory
: Locate the directory the upgrade file belongs to.
3.
Click
Browse
to select the upgrade file.
4.
Click
Upgrade
.
9.10
View Open Source Software License
Go to C
onfiguration
→
System
→
System Settings
→
About Device
, and click
View Licenses
.
9.11
Wiegand
This function is supported only by certain camera models.
Check
Enable
and select the protocol. The default protocol is SHA-1 26-bit.
If enabled, the recognized license plate number will be output via the selected Wiegand protocol.
9.12
Metadata
Metadata is the raw data that the device collects before algorithm processing. It is often used for third
party integration.
Go to
Configuration
→
System
→
Metadata Settings
to enable metadata uploading of the desired function.
Road Traffic
The metadata of road traffic is detected vehicle information, including the vehicle location in the scene,
vehicle ID, license plate, validity, moving direction, country/region, etc.
9.13
Time and Date
You can configure the time and date of the device by configuring the time zone, time synchronization, and
Daylight Saving Time (DST).
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......