HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 65 / 90

Network Camera User Manual
UM Network Camera 072221NA 65
Manual Alarm
You can trigger an alarm output manually.
Steps
1. Set the manual alarm parameters.
•
Alarm Output No
.: Select the alarm output no. according to the alarm interface connected to the
external alarm device.
• Alarm Name : Enter a custom name for the alarm output.
•
Delay
: Select
Manual
.
2. Click Manual Alarm to enable manual alarm output.
3.
Optional:
Click
Clear Alarm
to disable manual alarm output.
Automatic Alarm
Set the automatic alarm parameters to have the device trigger an alarm output automatically during the
set arming schedule.
Steps
1. Set automatic alarm parameters.
•
Alarm Output No.
: Select the alarm output no. according to the alarm interface connected to the
external alarm device.
• Alarm Name : Enter a custom name for the alarm output.
• Delay : The time duration that the alarm output remains after an alarm occurs.
2. Set the alarming schedule. For the information about the settings, see
Set Arming Schedule.
3. Click
Copy to…
to copy the parameters to other alarm output channels.
4. Click Save .
FTP/NAS/Memory Card Uploading
If you have enabled and configured FTP/NAS/memory card uploading, the device sends the alarm
information to the FTP server, network attached storage, and memory card when an alarm is triggered.
Refer to
Set FTP
to set the FTP server. Refer to
Set NAS
for NAS configuration.
Refer to
Set New or Unencrypted Memory Card
for memory card storage configuration.
Send Email
Check Send Email , and the device sends an e-mail to the designated addresses with alarm information
when an alarm event is detected.