Network Camera User Manual
UM Network Camera 072221NA
61
Enable Hik-Connect Service on Camera
Enable Hik-Connect service on your camera before using the service. You can enable the service through
SADP software or a Web browser.
Enable Hik-Connect Service via Web Browser
Follow the following steps to enable Hik-Connect Service via a Web browser.
Before You Start
Activate the camera before enabling the service.
Steps
1.
Access the camera via a Web browser.
2.
Enter platform access configuration interface,
Configuration
→
Network
→
Advanced Settings
→
Platform
Access
.
3.
Select Hik-Connect as the
Platform Access Mode
.
4.
Check
Enable
.
5.
Click and read “Terms of Service” and “Privacy Policy” in the pop-up window.
6.
Create a verification code or change the old verification code for the camera.
NOTE:
The verification code is required when you add the camera to Hik-Connect service.
7.
Save the settings.
Enable Hik-Connect Service via SADP Software
This part introduce how to enable Hik-Connect service via SADP software of an activated camera.
Steps
1.
Run SADP software.
2.
Select a camera and enter the
Modify Network Parameters
page.
3.
Check
Enable Hik-Connect
.
4.
Create a verification code or change the old verification code.
NOTE:
The verification code is required when you add the camera to Hik-Connect service.
5.
Click and read “Terms of Service” and “Privacy Policy.”
6.
Confirm the settings.
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......