Network Camera User Manual
UM Network Camera 072221NA
54
7.3
Set SRTP
The Secure Real-time Transport Protocol (SRTP) is a Real-time Transport Protocol (RTP) Internet protocol,
intended to provide encryption, message authentication, and integrity, and replay attack protection to the
RTP data in both unicast and multicast applications.
Steps
1.
Go to
Configuration
→
Network
→
Advanced Settings
→
SRTP
.
2.
Select
Server Certificate
.
3.
Select
Encrypted Algorithm
.
4.
Click
Save
.
NOTE:
Only certain device models support this function.
If the function is abnormal, check if the selected certificate is abnormal in certificate
management.
7.4
Port Mapping
By setting port mapping, you can access devices through the specified port.
Before You Start
When the ports in the device are the same as those of other devices in the network, refer to
Port to modify
the device ports.
Steps
1.
Go to
Configuration
→
Network
→
Basic Settings
→
NAT
.
2.
Select the port mapping mode.
•
Auto Port Mapping
: Refer to
Set Auto Port Mapping for detailed information.
•
Manual Port
Mapping
: Refer to
Set Manual Port Mapping for detailed information.
3.
Click
Save
.
Set Auto Port Mapping
Steps
1.
Check
Enable UPnP
™
, and choose a friendly name for the camera, or use the default name.
2.
Select the port mapping mode to
Auto
.
3.
Click
Save
.
Enable the UPnP
™
function on the router at the same time.
Summary of Contents for IDS-2CD7A46G0-IZHSY 8-32
Page 1: ...Network Camera User Manual...
Page 90: ......