HIKVISION IDS-2CD7A46G0-IZHSY 8-32, User Manual, Page: 30 / 90

Network Camera User Manual
UM Network Camera 072221NA 30
Video Standard
Video standard is an ability of a video card or video display device to define the number of colors that are
shown and the resolution. The two most common video standards used are NTSC and PAL. In NTSC, 30
frames are transmitted each second. Each frame is made up of 525 individual scan lines. In PAL, 25 frames
are transmitted each second. Each frame is made up of 625 individual scan lines. Select the video signal
standard according to the video system in your country/region.
Local Video Output
If the device is equipped with video output interfaces such as BNC, CVBS, HDMI, and SDI, you can preview
the live image directly by connecting the device to a monitor screen.
Select the output mode as ON/OFF to control the output.
4.7 OSD
You can customize OSD (On-screen Display) information such as device name, time/date, font, color, and
text overlay displayed on the video stream.
Go to the OSD setting page:
Configuration → Image → OSD Settings
. Set the corresponding parameters, and
click
Save
to take effect.
• Character Set : Select character set for displayed information. If Korean is required to displayed on
screen, select
EUC-KR
. Otherwise, select
GBK
.
•
Displayed
Information : Set camera name, date, week, and their related display format. For certain
device models, you can also set the tilt angle as the displayed information.
•
Text
Overlay : Set customized overlay text on image.
•
OSD
Parameters : Set OSD parameters such as Display Mode, OSD Size, Font Color, and Alignment.
4.8 Set Privacy Mask
This function blocks certain areas in the live view to protect privacy. Regardless of how the device moves,
the blocked areas will never be seen.
Steps
1. Go to the privacy mask setting page:
Configuration → Image → Privacy Mask
.
2. Check Enable Privacy Mask .
3. Click Draw Area . Drag the mouse in the live view to draw a closed area.
•
Drag the corners of the area
: Adjust the size of the area.
• Drag the area : Adjust the position of the area.
•
Click Clear All
: Clear all the areas you set.