User Manual of Network Camera
79
Steps:
1.
Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2.
Check the checkbox to set the actions taken for the Exception alarm. Refer to
Task 3
Set the Alarm Actions Taken for Motion Detection
in
Section 6.6.1.
Figure 6-49
Exception Settings
3.
Click
Save
to save the settings.
6.6.6
Configuring Face Detection
Note:
Face detection is only for certain modules, check the specification for whether
the module supports the function.
If you enable the face detection, once a face appears in the surveillance area, it will be
detected and certain actions may be triggered by the detection.