HIKVISION HWN-2104H-4P User Manual Download Page 165

Page: 165 / 227

Network Video Recorder User Manual

164

SNMP Settings Interface

Check the

SNMP

checkbox to enable this feature.

The enabling of SNMP may cause security problems. Click

Yes

to continue or

to cancel

the operation.

SNMP Settings Interface

When you choose the Yes option in step4, configure the following SNMP settings:

Trap Address:

IP Address of SNMP host.

Trap Port:

Port of SNMP host.

Click the

Apply

button to save and exit the interface.

Before setting the SNMP, please download the SNMP software and manage to receive the device
information via SNMP port. By setting the Trap Address, the NVR is allowed to send the alarm
event and exception message to the surveillance center.

Configuring More Settings

Enter the Network Settings interface.

Menu >

Configuration

> Network

Select the

More Settings

tab to enter the More Settings interface.

More Settings Interface

Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.

Summary of Contents for HWN-2104H-4P




































































































































































































































Search results

Summary of Contents for HWN-2104H-4P

Reviews:

Related manuals for HWN-2104H-4P

Brands by name

Popular brands

HIKVISION HWN-2104H-4P, User Manual

Search results

Summary of Contents for HWN-2104H-4P

Reviews:

Related manuals for HWN-2104H-4P

Brands by name

Popular brands