Digital Video Recorder User Manual
78
Figure 5-19
Copy Alarm Input
5.5 Configuring Event Recording and Capture
Purpose
The event triggered recording can be configured through the menu. Then events include the motion
detection, alarm and VCA events (face detection/face capture, line crossing detection, intrusion
detection, region entrance detection, region exiting detection, loitering detection, people gathering
detection, fast moving detection, parking detection, unattended baggage detection, object removal
detection, audio loss exception detection, sudden change of sound intensity detection, and defocus
detection).
For HWD-7100MH and HWD-7200MH series DVR, if enhanced VCA mode is enabled,
full-channel line crossing detection and intrusion detection, and 2-ch sudden scene change
detection are supported, but 2K/4K output and 4 MP/5 MP/8 MP signal input are not
supported; if enhanced VCA mode is disabled, 2-ch line crossing detection and intrusion
detection, and 2-ch sudden scene change detection are supported, and 2K/4K output and 4
MP/5 MP/8 MP signal input are also supported.
HWD-6200MH-G2 series support up to 4-ch line crossing detection and intrusion detection if
enhanced VCA mode is enabled. HWD-6216MH-G2 also supports 1-ch sudden scene change
detection. Channels with audio support audio exception detection.
For the analog channels, the line crossing detection and intrusion detection conflict with
other VCA detection such as sudden scene change detection, face detection and vehicle
detection. You can only enable one function.
Step 1
Go to
Menu > Camera > VCA
.
