HIKVISION HiWatch Series User Manual Download Page 33

Page: 33 / 95

Network Video Recorder User Manual

5. Optional: Enable Stream Encryption. It requires to enter verification code in remote access and

live view after this function is enabled.

6. Optional: Edit Server IP.
7. Bind your device with a Hik-Connect account.

1) Use a smart phone to scan the QR code, and download Hik-Connect app. You can also

download it from https://appstore.hikvision.com, or the QR code below. Refer to Hik-
Connect Mobile Client User Manual for details.

Figure 5-5 Download Hik-Connect

2) Use Hik-Connect to scan the device QR, and bind the device.

Note

●

If the device is already bound with an account, you can click Unbind to unbind with the
current account.

●

You can also use the QR code in

at the upper-left corner to download Hik-Connect and

bind your device.

8. Click Apply.

Result
●

If your device is connected with Hik-Connect platform, Connection Status will be Online.

●

If your device is bound with a Hik-Connect account, Bind Status will be Yes.

What to do next
You can access your video recorder via Hik-Connect.

5.2.3 Email

Set an email account to receive event notification.

Before You Start
●

Ensure SMTP service is available for your email.

●

Configure your network parameters. Refer to General for details.

Summary of Contents for HiWatch Series
































































































Search results

Summary of Contents for HiWatch Series

Reviews:

Related manuals for HiWatch Series

Brands by name

Popular brands

HIKVISION HiWatch Series, User Manual

Search results

Summary of Contents for HiWatch Series

Reviews:

Related manuals for HiWatch Series

Brands by name

Popular brands