manualshive.com logo in svg

HIKVISION HiLook PTZ-N2204I-DE3, User Manual, Page: 82 / 99

Share
Download
HIKVISION HiLook PTZ-N2204I-DE3 User Manual Download Page 82

What to do next

Go to TCP/IP settings page: Configuration → Network → Basic Configuration → TCP/IP , and click

Wlan to check the IPv4 Address and log in the device. See Access Device via Web Browser for

detailed information.

9.9 Set ISUP

When the device is registered on ISUP platform (formerly called Ehome), you can visit and manage

the device, transmit data, and forward alarm information over public network.
Steps
1. Go to Configuration → Network → Advanced Settings → Platform Access .
2. Select ISUP as the platform access mode.
3. Select Enable.
4. Select a protocol version and input related parameters.
5. Click Save.

Register status turns to Online when the function is correctly set.

9.10 Set Open Network Video Interface

If you need to access the device through Open Network Video Interface protocol, you can

configure the user settings to enhance the network security.
Steps
1. Go to Configuration → Network → Advanced Settings → Integration Protocol .
2. Check Enable Open Network Video Interface.
3. Click Add to configure the Open Network Video Interface user.

Delete

Delete the selected Open Network Video Interface user.

Modify Modify the selected Open Network Video Interface user.

4. Click Save.
5. Optional: Repeat the steps above to add more Open Network Video Interface users.

9.11 Set Network Service

You can control the ON/OFF status of certain protocol as desired.
Steps

Note

This function varies according to different models.

1. Go to Configuration → Network → Advanced Settings → Network Service .

Network Speed Dome User Manual

73

Summary of Contents for HiLook PTZ-N2204I-DE3




































































































Reviews:

No comments