Note
HiLookVision service should be supported by the camera.
9.7.1 Enable HiLookVision Service on Camera
HiLookVision service should be enabled on your camera before using the service.
You can enable the service through SADP software or Web browser.
Enable HiLookVision Service via Web Browser
Follow the following steps to enable HiLookVision Service via Web Browser.
Before You Start
You need to activate the camera before enabling the service.
Steps
1. Access the camera via web browser.
2. Enter platform access configuration interface. Configuration → Network → Advanced Settings
→ Platform Access
3. Select HiLookVision as the Platform Access Mode.
4. Check Enable.
5. Click and read "Terms of Service" and "Privacy Policy" in pop-up window.
6. Create a verification code or change the old verification code for the camera.
Note
The verification code is required when you add the camera to HiLookVision service.
7. Save the settings.
Enable HiLookVision Service via SADP Software
This part introduce how to enable HiLookVision service via SADP software of an activated camera.
Steps
1. Run SADP software.
2. Select a camera and enter Modify Network Parameters page.
3. Check Enable HiLookVision.
4. Create a verification code or change the old verification code.
Note
The verification code is required when you add the camera to HiLookVision service.
5. Click and read "Terms of Service" and "Privacy Policy".
Network Speed Dome User Manual
70
Summary of Contents for HiLook PTZ-N2204I-DE3
Page 1: ...Network Speed Dome User Manual...
Page 99: ...UD22758B A...