HIKVISION HiLook IK-4248TH-MH/P User Manual Download Page 88

Page: 88 / 99

Network Video Recorder User Manual

Figure 6-31 Quota

Note

When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.

5. Click Apply.
6. Restart the video recorder to activate the new settings.

6.5.5 Advanced Settings

Steps
1. Go to Configuration → Record → Advanced.
2. Configure the parameters as your desire.

Overwrite

●

Disable: When the HDD is full, video recorder will stop writing.

●

Enable: When hard drive is full, video record will continue to write new files by deleting the
oldest files.

Enable HDD Sleeping

HDDs which are free of working for a long time will turn into sleep status.

Save Camera VCA Data

Camera VCA data will be saved so that you can search it.

Alarm Storage

When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing alarm information.

Picture Storage

When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing pictures.

Summary of Contents for HiLook IK-4248TH-MH/P




































































































Search results

Summary of Contents for HiLook IK-4248TH-MH/P

Reviews:

Brands by name

Popular brands

HIKVISION HiLook IK-4248TH-MH/P, User Manual

Search results

Summary of Contents for HiLook IK-4248TH-MH/P

Reviews:

Brands by name

Popular brands