HIKVISION DY3 Series, Quick Start Manual, Page: 55 / 68

Network PTZ Camera
·
Quick Start Guide
42
Rotate Counterclockwise
Separate the Base Plate from the
PTZ Camera
Figure 2-60
Separate the Base Plate from the PTZ camera
2. Attach the drill template (supplied) to the place where you want
to fix the PTZ camera, and drill a hole in the ceiling according to
the template.
21
2
Ø
Figure 2-61
Drill Template
3. Align the cable holes of the base plate to the cable holes of the
in-ceiling bracket and then fix the base plate onto the bracket with
the four screws in the package (supplied), as shown in Figure 2-62.