Guidance Terminal User Manual
51
5.
Reboot the guidance terminal to take the settings into effect. Then you can view
the
Register Status
to see if the terminal is accessed to Hik-Connect successfully.
If the status is online, register the Hik-Connect account, and add the terminal to
Hik-Connect.
4.2.14
Configuring Remote Host
You can set the remote host parameters for the data uploading in the Remote Host
interface.
Steps
:
1.
Select the remote host from the drop-down list.
2.
Enter the
IP Address
,
Port
and
Uploading Timeout Interval
.
3.
Click
Save
to save the settings.
Figure 4-45
Remote Host
4.2.15
Viewing Status
You can view the system status in Status interface.
Viewing Network Uploading Status
You can view the network uploading status to find out if the remote host is enabled. If
the status is
Disable
, you should check if the IP address and other parameters are
correctly configured in Remote Host interface.
