Guidance Terminal User Manual
20
Chapter 4
Configuration
Purpose:
The parameters, such as protocol, stream type, network, alarm, etc., can be configured
via the web browser.
Click
Configuration
tab to enter the Configuration page.
4.1
Local Configuration
Steps:
1.
Go to
Configuration > Local Configuration
.
Figure 4-1
Local Configuration
2.
Set the corresponding parameters such as protocol, stream type, image size, etc.
as desired.
3.
Click
Browse
to select a local saving path for the files.
4.
Click
Save
to save the settings.
Refer to the following descriptions of local configuration parameters.
Parameter
Description
Protocol
TCP/UDP are selectable.
