Control Terminal’s User Manual
15
3.5
Assembling the Device
Upper Cover
HDD
PCB Board
Thermal module
Front Cover
Lower Cover
Figure 3-6
Main Components
Steps:
1.
Align the PCB board with the standoffs, and secure the PCB board by tightening
the lock screws.
2.
Align the thermal module with the standoffs, and secure the thermal module with
by tightening the lock screws.
3.
Install the HDD to the standoffs, and tighten the lock screws.
4.
Connect the HDD cables to the corresponding interfaces.
5.
Align the front cover to the interfaces of the PCB board, and tighten the lock
screws.
6.
Install the fixed strip, align the upper cover to the lower cover, and secure the
upper cover and lower cover by tightening the lock screws.
7.
Install the grounding screws.
