DS-TP50-12DT Terminal Server User Manual
54
The default Port for SDK Protocol and Private Protocol are 5650 and 5682 separated.
Step 5
Select Data Type to upload in the dropdown list.
Step 6
You can select Upload Historical Data and Upload No-Plate Data as Enable to upload
historical data and No-plate data.
Upload Historical Data: Upload historical data in HDD.
Step 7
Enable the Upload by Time and set the Uploading Start Time and Uploading End Time. Up
to 2 periods can be set. Device only uploads data during the start time and end time.
Step 8
Enter Upload Interval (ms) and Upload Timeout Interval (ms).
Step 9
Optionally, set the Enable Cloud Storage settings. Thus the data are saved in Cloud Storage
device.
1)
Check Enable Cloud Storage checkbox.
2)
Enter cloud storage Management Server IP Address, Command Port, User Name, and
Password.
3)
Enter Normal Vehicle Picture and Record File Pool ID and Traffic Violation Picture
and Record File Pool ID.
Figure 11-2
Cloud Storage
Step 10
Click Save to save the settings.
11.2 FTP Settings
Purpose:
Device provides two FTP servers. Configure the parameters, thus to upload data to the two FTP
servers.
Step 1
Go to Configuration > Remote Configuration > Custom Settings.
