DS-TP50-12DT Terminal Server User Manual
37
Configure the Interaction Mode between terminal server and traffic cameras.
Step 1
Go to Configuration > Remote Configuration > Camera Settings > Interaction Configuration.
Figure 7-4
Interaction Configuration
Step 2
Select camera to configure in Select Camera dropdown list.
Step 3
Select Interaction Mode as Normal Mode or Data Receiving Mode. The default one is
Normal Mode.
Normal Mode: Device can record videos, live view, and receive pictures from the selected
camera.
Data Receiving Mode: Device can only receive pictures from the selected camera. Recording
videos and live view are not supported.
Step 4
Click and select camera(s). Thus to configure the same parameters to selected camera(s).
Step 5
Click Save to save the settings.
7.7 Alarm Output
Purpose:
You can configure the delay time, arming time, and alarm output name.
Step 1
Go to Configuration > Remote Configuration > Alarm Settings > Alarm Output.
