DS-TP50-12DT Terminal Server User Manual
10
For Windows 10 operation system, to access the terminal server via Internet Explorer 10, you need
to Run IE10 as an Administrator.
3.3 Set the Admin Password
Purpose:
For the first-time access, you need to activate the device by setting an admin password. No
operation is allowed before activation. You can also activate the device via Web Browser, SADP or
Client Software.
Before you start:
Set the IP address of your computer. Make sure the device is in the same network segment with
your computer.
The default IP address for G1 network interface is 192.168.1.2.
The default IP address for G2 network interface is 192.0.0.64.
Step 1
Enter device IP address in address bar of the browser and press Enter. Thus the activation
interface pops up.
Step 2
Enter the Admin Password and Confirm Password.
Figure 3-1
Setting Admin Password
STRONG PASSWORD RECOMMENDED– We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Step 3
Click OK to set the admin password.
Step 4
After successful login, follow the prompt to install the plug-in.
