User Manual of DS-TME4XX Series Entrance & Exit Station
32
Step 2
Configure the parameters, including the NIC Type, IPv4/IPv6 Address, IPv4/IPv6 Subnet Mask,
IPv4/IPv6 Default Gateway, MAC Address and MTU.
MTU refers to the maximum size of data packet in transmission.
Step 3
(Optional) If the DHCP server is available, you can check the checkbox of
DHCP
to
automatically obtain an IP address and other network parameters.
Step 4
(Optional) If the DNS server settings are required for some applications (e.g., sending email),
you should properly configure the
Preferred DNS Server
and
Alternate DNS server
.
Step 5
Click
Save
to save the settings.
6.3.2 Configuring Port
Step 1
Enter the Port configuration interface.
Configuration > Network > Basic Settings > Port
Figure 6-15
Port Configuration
Step 2
View the port parameters including
HTTP Port
(80 by default),
RTSP Port
(554 by default),
HTTPS Port
(0 by default) and
Server Port
(8000 by default).
Do not modify the default port parameters freely. If there is port conflict and you have to modify
the parameters, modify the following information.
HTTP Port
and
HTTPS Port
: Add the modified port to the address if you log in to the device via
web browser. E.g., if you modify the HTTP Port to 81, input
address bar to log in to the device via web browser.
RTSP Port
: Ensure the modified RTSP Port is available.
Server Port
: If you modify the Server Port and want to log in to the device via client, you have
to input the modified Server Port on the login interface.
