User Manual of DS-TME4XX Series Entrance & Exit Station
23
Number of Channels, Number of HDDs and Number of Alarm Input depend on the actual device.
6.2.2 Configuring Time Settings
Step 1
Enter the Time Settings interface.
Configuration > System > System Settings > Time Settings
Figure 6-3
Time Settings
Step 2
Select the
Time Zone
.
Step 3
Configure the synchronization (NTP Time Synchronization or Manual Time Synchronization).
NTP
: After enabling NTP, the NTP server will synchronize the device time at regular intervals.
1)
Click the radio button before NTP to enable it.
2)
Input the
Server Address
,
NTP Port
and
Interval
.
Manual Time Sync.
: After enabling Manual Time Synchronization, the device time can be
synchronized with the set time or the computer time.
1)
Click the radio button before
Manual Time Sync.
to enable it.
2)
Click
to set the time.
