User Manual of Parking Camera
59
Chapter 8
Configuration Parking
Space Detection
Purpose:
To detecting the parking space, you should enable the VCA function and configure the
corresponding parameters. Follow the instructions below to realize the parking space
detection.
8.1
Configuring Detection Rules
Steps:
1.
Enter the VCA configuration interface.
Configuration > Advanced Configuration > VCA
Figure 8-1
Setting Basic Parameters
2.
Click the Basic Parameters tab and configure the following options.
Parking Space Detection:
Select the Enable in the dropdown list to turn on the
Parking Space Detection.
Back Recognition:
Select the Enable in the dropdown list to enable the license
plate recognition when the vehicle is back parked into the space.
Large Plates:
Normally, the camera is recommended to be placed about 5 m away
from the parking spaces to ensure the plate recognition accuracy. But if the
parking camera is placed much nearer to the spaces than the recommended
distance, the license plate possesses greater pixels in the image which will make it
looks large, then you should enable the Large Plate function to improve the
accuracy of the license plate recognition.
Farm Vehicle:
For the license plate of fame vehicles, there are much different
from other ones of normal vehicles. Enable the Farm Vehicle function to
recognize the license plate number of farm vehicles.
Logo Recognition:
Enable the function to recognize the logo of the vehicle.
3.
Click the Analysis Parameters tab and configure the following options.