HIKVISION DS-TCP045, User Manual, Page: 43 / 93

User Manual of Parking Camera
42
9.3.5 Configuring SNMP Settings
Purpose:
You can set the SNMP function to get camera status, parameters and alarm related
information and manage the camera remotely when it is connected to the network.
Before you start:
Before setting the SNMP, please download the SNMP software and manage to receive
the camera information via SNMP port. By setting the Trap Address, the camera can
send the alarm event and exception messages to the surveillance center.
The SNMP version you select should be the same as that of the SNMP software. And
you also need to use the different version according to the security level you required.
SNMP v1 provides no security and SNMP v2 requires password for access. And
SNMP v3 provides encryption and if you use the third version, HTTPS protocol must
be enabled.
STRONG PASSWORD RECOMMENDED
–We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters, including
at least three of the following categories: upper case letters, lower case letters,
numbers, and special characters.) in order to increase the security of your product.
And we recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your product.
Steps:
1. Enter the SNMP Settings interface:
Configuration > Advanced Configuration > Network > SNMP