User Manual of Parking Camera
58
Figure 9-28
Privacy Mask Settings
4.
Click and drag the mouse in the live video window to draw the mask area.
You are allowed to draw up to 4 areas on the same image.
5.
Click
Stop Drawing
to finish drawing or click
Clear All
to clear all of the areas
you set without saving them.
6.
Click
Save
to save the settings.
9.6
Configuring and Handling Alarms
This section explains how to configure the parking camera to respond to alarm events,
including motion detection and exceptions. These events can trigger the linkage
methods, such as Notify Surveillance Center.
Check the checkbox of Notify Surveillance Center if you want the alarm information
to be pushed to PC or mobile client software as soon as the alarm is triggered.
9.6.1
Configuring Motion Detection
Purpose:
Motion detection detects the moving objects in the configured surveillance area, and a
series of actions can be taken when the alarm is triggered.
Steps:
1.
Set the motion detection Area.
(1)
Enter the motion detection settings interface
Configuration > Advanced Configuration> Events > Motion Detection
(2)
Check the checkbox of
Enable Motion Detection
.
(3)
Check the checkbox of
Enable Dynamic Analysis for Motion
if you want to
mark the detected objects with green rectangles.
Disable rules if you don’t want the detected object displayed with the rectangles.
Disable from
Configuration > Local Configuration > Live View Parameters >
Rules
.
Summary of Contents for DS-TCP045
Page 1: ...0 User Manual UD06243B Parking Camera...
Page 93: ...92...