DS-PRI120 Security Radar User Manual
UM DS-PRI120 091720NA
21
Figure 4-17 Finish Map Calibration
6)
Click
Radar Settings → End Map
Calibration
.
4.2.3
Add Radar Zone
Before You Start
You need to disarm the radar before the operation. Click
Finish
in the E-map page to exit the editing mode.
Click on the radar icon and select
Disarm
to disarm the radar.
1.
In E-map page, click
Edit
to enter the editing mode.
2.
Optional:
Enable
Field Assisstan
in the upper left corner of the map. The target track will appear on the
radar detection area. You can draw a zone with reference to the track. The track clears when disabled.
3.
Click
Radar Settings
→
Draw Zone Manually
, and click the mouse to draw a zone on the radar detection
area.
