DS-PRI120 Security Radar User Manual
UM DS-PRI120 091720NA
12
Chapter 4 Radar Settings
You can add zones, and set camera tracking parameters for the radar in the client software or Web client.
4.1
Radar Settings in the Web Client
Edit maps, radars, zones and trigger lines in Web client.
Staying in the Radar page for two hours without any operation will automatically log out.
•
Staying in the Configuration page for 5 minutes without any operation will automatically log out.
•
The Radar page in the Web client cannot receive CID alarms and zone color changes.
4.1.1
Add Map
1.
Enter the IP address of the radar and log in.
2.
Click
Radar
to enter the page.
3.
Click
Edit
to enter the editing mode.
4.
Click
Map Management → Add Map
.
The added map should be less than 3 MB.
5.
Load a map and click
OK
.
6.
Click
Map Management → Edit Scale
.
7.
Click on the map to draw a straight line, select the end position and click again to complete the drawing.
8.
Enter the actual distance between two points.
