DS-PR1-60 User Manual
UM DS-PR1-60 090920NA
41
5.6
Pop-up Alarm Notification
Before You Start
•
Link the camera to the zone.
•
Add the camera, the NVR and the radar to the client software.
•
You need to check
Pop-up Window
in the security control panel event page.
1.
In the client software, click
E-map
to enter the page.
2.
Click on the bottom of the page to show the alarm event list.
3.
Click to enable alarm triggered pop-up image.
4.
When the alarm is triggered, the client software will automatically pop up an alarm window.
Figure 5-13 The Alarm Window
•
Check
Auto-Update Event
, the window will automatically switch to the new alarm video and display
the new alarm video in real time.
•
Click
Previous
or
Next
to view unread alarm messages.
•
Click
Exit
to exit the alarm window.
When the alarm window is not closed and the alarm is triggered again. You need to click
Next
to view the alarm triggered pop-up image.
Summary of Contents for DS-PR1-60
