HIKVISION DS-PR1-60, User Manual, Page: 28 / 71

DS-PR1-60 User Manual
UM DS-PR1-60 090920NA 28
Figure 5-2 Set Initial Position
5.2 Link the Camera to the Radar
Before You Start
Click Finish in the E-map page to exit the editing mode. Click on the radar icon and select Disarm to disarm the
radar.
1. In the client software, click Device Management . Select a radar in the device list. Click → Smart Rule
Settings → Camera Linkage Settings to enter the page.
You can also enter IP address of the radar in a browser to enter the Web client. Click Smart
Rule Settings → Camera Linkage Settings to enter the page.
2. Add a camera.
1) Click + .
2) Enter the IP address, port, user name, password of the camera, and select whether to link to NVR.
To use the NVR for video storage, you can choose to link the NVR and configure the NVR
parameters.