Keypad User Manual
13
Chapter 2
Installation and Wiring
2.1
Wiring Connector Description
No.
Description
1
Loud Speaker
2
Tamper-Proof Switch
3
Wiring Connector
4
DlP Switch
2.2
Keypad Address Settings
An address is required for each alarm keypad in the system. These addresses
cannot be repeated. Once exchanging the alarm keypad, the address of the new
keypad must be the same as the replaced one. You should configure the address
via DIP switch of the keypad before powering on the system. The address should
be in the range of 1~31.
When it is black on the end of
ON
as
, indicated 1; when it is black on the other
end as
, indicated 0.
