HIKVISION DS-PHA20-M, User Manual, Page: 84 / 127

Enable the function and the zone will be bypassed. No alarm will be received while the zone
is bypassed.
Link Camera
You can link the zone to cameras. When an alarm is triggered, you can monitor the zone via
the linked cameras.
Stay/Away
If this option is Enabled the zone will be auto bypassed when the alarm system is stay armed.
To re-enable the zone deselect the option.
Enable Silent Zone
Enable the function and no sounder will be triggered if an event or alarm occurs.
4.3.12 Set Arming/Disarming Schedule
Set the arming/disarming schedule to arm/disarm a particular zone automatically.
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap → Area Management and select a area, or tap on the Parition page to enter the Settings
page.
Enable the auto arm/disarm function and set the auto arm time/auto disarm time. You can also set
the late to disarm time, entry delay time, exit delay time, sounder delay time, weekend exception
and excepted holiday.
Hybrid Security Control Panel User Manual
76