manualshive.com logo in svg

HIKVISION DS-PHA20-M, User Manual, Page: 13 / 127

Share
Download
HIKVISION DS-PHA20-M User Manual Download Page 13

Chapter 3 Activation

In order to protect personal security and privacy and improve the network security level, you

should activate the device the first time you connect the device to a network.

3.1 Activate Device via Web Browser

Use web browser to activate the device. Use SADP software or PC client to search the online device

to get the IP address of the device, and activate the device on the web page.
Before You Start

Make sure your device and your PC connect to the same LAN.
Steps

1. Open a web browser and input the IP address of the device.

Note

If you connect the device with the PC directly, you need to change the IP address of your PC to

the same subnet as the device. The default IP address of the device is 192.0.0.64.

2. Create and confirm the admin password.

Caution

STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of

your own choosing (using a minimum of 8 characters, including upper case letters, lower case

letters, numbers, and special characters) in order to increase the security of your product. And

we recommend you reset your password regularly, especially in the high security system,

resetting the password monthly or weekly can better protect your product.

3. Click OK to complete activation.

4. Edit IP address of the device.

1) Enter IP address modification page.

2) Change IP address.

3) Save the settings.

Note

• The default user name of admin account is admin.

• You should login the admin account first to enable the installer and the maintenance.

• The default password of the installer is installer12345, and the default password of the

maintenance (for Italian, the user name is costruttore) is hik12345. These password will have

to be changed when first connected.

• The Italian user name of admin is admin.

Hybrid Security Control Panel User Manual

5

Summary of Contents for DS-PHA20-M
































































































































Reviews:

No comments