HIKVISION DS-PHA20-M, User Manual, Page: 126 / 127

Appendix G. Communication Matrix and Device
Command
Communication Matrix and Device Command
Scan the following QR code to get the device communication matrix and device common serial
port commands.
Note that the matrix contains all communication ports of Hikvision security control devices.
Figure G-1 QR Code of Communication Matrix and Device Command
User Privacy Statement
• The debug or zhimakaimen command is used to control access to the file system to ensure
device security. To obtain this permission, you can contact technical support.
• The device has admin, installer, maintenance, operator account. You can use these accounts to
access and configure the device.
Table G-1 User Privacy Information Description
Password The password for the device account, used to
log in to the device.
Username The username for the device account, used to
log in to the device.
Device IP and port The device IP and port are used to support
network service communication. For details,
refer to Communication Matrix.
Log Used to record information such as device
operating status and operation records.
Database information Used to record information.
Hybrid Security Control Panel User Manual
118