HIKVISION DS-PHA20-M, User Manual, Page: 116 / 127

Appendix C. Output Types
Table C-1 Output Types
Output Types Active Restore
Arming Arm the control panel After the configured output
delay
Disarming Disarm the control panel After the configured output
delay
Alarm When alarm event occurs. The
alarm output will be activated
after the configured exit/enter
delay.
After the configured output
delay, disarm the control panel
or clear alarm
Zone Linkage When alarm event occurs, the
linked relay will output alarm
siganl.
After the configured output
duration
Manual Operation Enable relays manually Over the triggering time or
disable the relays manually
Hybrid Security Control Panel User Manual
108