Panic Alarm Station
User Manual
54
Audio Input
The input type is micln by default. You can set the volume.
Audio Output
The output type is spkOut. You can set the volume.
3. Click Save.
Figure 4-2 Audio Parameters
Steps
1. Click Image → OSD Settings.
2. Set parameters.
Change Display Position
Drag the red box on the preview interface to change the position of the displayed information.
After saving, the displayed information will be updated to a new position.
Change Display Format
-
Date Format
You can select the date display format in the date format drop-down box.
-
Time Format
You can select 24-hour or 12-hour format in the time format drop-down box.
-
Display Mode
According to whether the display information is transparent or flashing, there are four freely
combined display mode for selection. For example, if the display mode is transparent and
flashing, the information will be displayed with a certain transparency and will flash.
-
OSD Size
